Floor Tiling - Quickie!

Joined
10 Aug 2006
Messages
85
Reaction score
0
Location
Oxfordshire
Country
United Kingdom
I'm tiling the flor of my ensuite, but haven't got a clue how to finish it off in the door way leading to the carpeted bedroom - there is a slight hight difference.. Is it acceptable to use a modified carpeting door bar, or is there a specific device made for this task!!?

ta...

Netto :)
 
Sponsored Links
You can get carpet to tile trim from B&Q in either chrome or gold finish. You screw it down then squash the trim onto the tile and carpet by beating it with a bit of wood and a hammer. The piece of wood is very important, do not try and beat it down without or you risk cracking the tiles.
 
Whilst you're at B&Q there is another type of trim designed for joining different level floors. You don't screw it down so no nasty little screws to snag your bare feet on! There's basically a base plate that you srew to the floor and a solid trim that snaps into the plate. Good luck! :)
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top