Freestanding bath tap leg kit

Joined
14 Sep 2010
Messages
7,034
Reaction score
874
Location
Rochdale
Country
United Kingdom
Does anyone know how these attach to the tap and then how the tap attches to the flexis?

https://www.ebay.co.uk/itm/262926631483

I'm wondering if I could turn a standard bath/shower mixer into a freestanding tap.

I've got a tap and a pair of 160mm tall, 3/4 threaded legs but need to raise them about 400mm to hang over the bath.

Thanks.
 
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
You purchased a puzzle.

That kit is for hiding the flexi supply pipes when the tap is fitted on the rim of the bath or a platform. this instruction (although a premium item,well worth buying a named product) shows how it can be installed,under rim or platform...https://images.victorianplumbing.co.uk/images/pdf/SHR-C.PDF

Dont know what tap you have but you could make it fit but it may look like a bodge up.

So you need a freestanding tap or bath shower mixer and stand pipe pack,they are higher and angled 90 degree so the spout is over the bath.

Good luck,
 
Here we are. This is the tap:

IMG_0230.JPG


And these are the legs I found which do match and are long enough so we won't see the bottom joint once behind the bath:
IMG_0231.JPG


If only they were 400mm longer!! I did wonder if I could put a 3/4 x 1 1/2 bush onto the legs and get some female threaded 1 1/2 chrome tube to go over my flexis.
 
Sponsored Links
Links in this post may contain affiliate links for which DIYnot may be compensated.

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top