Honeywell PIR Wiring

[ITGURU]

Hi Everyone,
I've previously setup an alarm system with honeywell 8ir103 PIRs with the resisters etc.
I'm installing another G2 system and the PIRs are end of life so now using IS312 PIRs.
Can someone just clarify which terminals on the PIR i use for each of the 2 data cables, and I presume i'll still need 2x resistors in the PIR for tamper/alarm scenarios?
Thanks in advance.

 

[GalaxyGuy]

Hi, not sure if it's just the 312B that comes with EOL, but here's the wiring. Just wire the two wires shown back to the zone and 0v (in the middle of the zones). There's no polarity to the zone.

 

[ITGURU]

Hi, not sure if it's just the 312B that comes with EOL, but here's the wiring. Just wire the two wires shown back to the zone and 0v (in the middle of the zones). There's no polarity to the zone.

Yes the model I have doesn't come with EOL resisters included and I think you forgot to attach something ? thanks.