Hotpoint aquarius WF541 will not switch on

[b8014024]

My Hotpoint aquarius WF541 will not switch on, when switching electric power on all the lights flash on once and then nothing its totally dead.

So far I have cleaned the filter and blown down the pressure switch rubber pipe and it makes no differences.

The machine is nearly two years old, there is no sign of the motor bushes wearing out (Black carbon) I had this fault on my old Hotpoint and there was tell-tell signs of black carbon everywhere and it was much older.

Ideas please

 

[jj4091]

It may be the control board(expensive) & I think if you registered your machine when you purchased it it may be covered by a 3 year parts warranty, in which case you will only have to pay call out charge. Call Hotpoint & ask them.

 

[daveyo]

Did you find a fix for this?? i have EXACTLY the same problem

 

[rocks1]

yes pcb is faulty .

 

[daveyo]

do you know of a trusted place I can get one pretty cheaply?

many thanks for your advice rocks.
i removed the pcb and a couple of the spikes (connectors) look burnt out

 

[rocks1]

http://www.emwelec.co.uk/ very good and cheap .