Hotpoint wf540 washing machine

[Seandoc36]

Hi all i have a problem with the washing machine stopping with the lights rinse hold stock on and the power light is flashing fast! i have took the clips off the pump and emptyed what should not be in there and put the ball back in the filter, i have unpluged the board and put the power on for 5 mins hoping this will reset it?

 

[rocks1]

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light

 

[Seandoc36]

Hi all i have a problem with the washing machine stopping with the lights rinse hold stock on and the power light is flashing fast! i have took the clips off the pump and emptyed what should not be in there and put the ball back in the filter, i have unpluged the board and put the power on for 5 mins hoping this will reset it?

Any idea's then rocks?

 

[Seandoc36]

View My Video

 

[Seandoc36]

i have since tried to do another cycle program F and it keeps getting stuck with the Rinse Hold light on and the Power Light flashing very fast!!!! so looks like i will have to get a engineer out at some point, don't think this is the first time this has happened!!

 

[Leccy758]

look at the error code list that rocks posted, the lights are numbered from left to right, choose which light is staying on and look.

 

[Seandoc36]

hello all not sure on how you work out the lights via the list rocks has put on here my machine is now showing lights flashing Reduced Creases and mini load and the on/off button ??

Thanks

 

[rocks1]

On the left of the consol panel is 5 lights. No1 is the top one ignore the on off button. So what number lights are flashing then I will tell you the error code.

 

[Seandoc36]

its 2 and 4 cheers mate

 

[rocks1]

That's error fo5 filter/ pump / waste pipe blocked

 

[Seandoc36]

ok cheers will open the back up and check it to see whats blocking the pipes