Hi
Can anyone offer me some advice on this please?
Got double timber gates (approx 6' high by 5' wide each). They are fixed onto 4x4" timber posts.
I have 2 normal bolts and a handle/catch on the gates, as well as long drop bolts on bottom of each gate.
The problem i have is the gates are rattling as the drop bolts are approx 15mm diameter and the metal sleeve that we out into concrete is a bit bigger. There is also a bit movement on the gates, and the drop bolts move about a little in the guide brackets on the gate due to them being a larger diameter than 15mm.
Anyone have any suggestions to improve it?
thanks
gary
Can anyone offer me some advice on this please?
Got double timber gates (approx 6' high by 5' wide each). They are fixed onto 4x4" timber posts.
I have 2 normal bolts and a handle/catch on the gates, as well as long drop bolts on bottom of each gate.
The problem i have is the gates are rattling as the drop bolts are approx 15mm diameter and the metal sleeve that we out into concrete is a bit bigger. There is also a bit movement on the gates, and the drop bolts move about a little in the guide brackets on the gate due to them being a larger diameter than 15mm.
Anyone have any suggestions to improve it?
thanks
gary