Been lurking here for a while and usually find an answer to my questions.
I will be installing Ikea kitchen cabinets on the walls of my house this week and I am bemused by the range of fixings out there.
One of the walls is masonary and the other wall is breeze block. The old cabinets were all held on with a bracket with 2 screws in rawl plugs. But these Ikea cabinets only have one screw hole for fixing each end of the unit.
I am therefore a bit concerned about using 1 screw at each end of these units, they are also taller (92cm).
Anyone got any recommendations as to what I should be using, I was thinking along the lines of "Sleeve Anchor 10 x 75mm M8 Max Fixture 39" from screwfix. What do you think, all suggestions gratefully received.
I will be installing Ikea kitchen cabinets on the walls of my house this week and I am bemused by the range of fixings out there.
One of the walls is masonary and the other wall is breeze block. The old cabinets were all held on with a bracket with 2 screws in rawl plugs. But these Ikea cabinets only have one screw hole for fixing each end of the unit.
I am therefore a bit concerned about using 1 screw at each end of these units, they are also taller (92cm).
Anyone got any recommendations as to what I should be using, I was thinking along the lines of "Sleeve Anchor 10 x 75mm M8 Max Fixture 39" from screwfix. What do you think, all suggestions gratefully received.