Hi
I'm looking for some contact adhesive which gives a little time to move.
I used mitre Adhesive from screwfix - before
https://www.screwfix.com/p/no-nonsense-mitre-adhesive-200ml/41795
Which has been fine, except for one bit that i placed slightly in the wrong place and just needed to move 3mm !!!!!!
Will be using 8mmx95mm finished redwood and gluing around all the edges of Hardboard doors.
Creating a bit of a feature to these very plain doors, Which are smaller than standard doors - so not easy to replace
have 7 to do.
Any suggestions on how to glue , I didn't really want to clamp each one and wait 24 hours , using something like PVA, i dont have that many clamps (12) , and when seen done on youtube they use 4 or more clamps per edge!!!
The mitre glue worked fine on some panelling I put in a cloakroom , on doors & cupboard - Just this one bit that i missed with a Jig etc !!!!!!!
Wife said, she was told to put wallpaper paste into the contact adhesive which gave time to move a little
Thanks
I'm looking for some contact adhesive which gives a little time to move.
I used mitre Adhesive from screwfix - before
https://www.screwfix.com/p/no-nonsense-mitre-adhesive-200ml/41795
Which has been fine, except for one bit that i placed slightly in the wrong place and just needed to move 3mm !!!!!!
Will be using 8mmx95mm finished redwood and gluing around all the edges of Hardboard doors.
Creating a bit of a feature to these very plain doors, Which are smaller than standard doors - so not easy to replace
have 7 to do.
Any suggestions on how to glue , I didn't really want to clamp each one and wait 24 hours , using something like PVA, i dont have that many clamps (12) , and when seen done on youtube they use 4 or more clamps per edge!!!
The mitre glue worked fine on some panelling I put in a cloakroom , on doors & cupboard - Just this one bit that i missed with a Jig etc !!!!!!!
Wife said, she was told to put wallpaper paste into the contact adhesive which gave time to move a little
Thanks
Last edited: