I've been fitting a new bathroom suite and I thought the bath was done and dusted a few weeks back ... but ... I checked today and discovered that the seal between the shower mixer taps and the plastic bath is not watertight and it leaks through to the underneath of the bath. I've already fitted everything in place - seals etc and am loath to undo it all so I can get access to the taps to try reseating them. Is there anything I can use from the topside to seal the leak - silcone sealant? If have to remove the bath and have another go at seating the taps in, what can I use to get a good seal?
Thanks, Jon.
Thanks, Jon.