We had a mixer tap on the bath and pump fitted in airing cupboard for central heating . We were alerted to a smell and noticed we have a leak. I turned the wheel and now its still leaking and dont know what position wheel should be in and how to stop leak. Please help. It is the pipe with wheel near bottom of airing cupboard and connects into big cylinder
leak in my airing cupboard
- Thread starter janet14
- Start date
Sponsored Links
Its probably been caused when valve has been shut and then opened again after carrying out remedial works.
Sounds like a leak on the valve spindle, best get a Plumber in and renew valve for a lever type.
Sounds like a leak on the valve spindle, best get a Plumber in and renew valve for a lever type.
Sponsored Links
- Joined
- 21 Sep 2011
- Messages
- 4,750
- Reaction score
- 1,118
- Country
Sounds like a gate valve as said the little nut on the spindle should stop it but as to position it depends what the valve is controlling, It might be a simple isolation valve which wants to be fully open and then closed just slightly (about 1/8 to 1/4 turn) to prevent it jambing. If it is on the by-pass it needs to be adjusted according to the system, if you can post some pictures with luck somebody can identify what it is for.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
