Some help needed please !
I have removed an old light fitting at the top of our stairs (obviously isolating power from the fuse box first). The light is controlled by a switch upstairs and a switch at the bottom of the stairs.
The old fitting had no rose, just a brass base plate with 2 separate bulb holders. Entering from the ceiling were 2 sets of wires - brown & blue to one bulb holder, another brown & blue to the other, and a green/yellow earth connected to the brass plate itself.
My new b&q light fitting just has a connector block in it for 2 cables- one for live, 1 for neutral. How do I go about fitting this into the existing connections please ?
I have removed an old light fitting at the top of our stairs (obviously isolating power from the fuse box first). The light is controlled by a switch upstairs and a switch at the bottom of the stairs.
The old fitting had no rose, just a brass base plate with 2 separate bulb holders. Entering from the ceiling were 2 sets of wires - brown & blue to one bulb holder, another brown & blue to the other, and a green/yellow earth connected to the brass plate itself.
My new b&q light fitting just has a connector block in it for 2 cables- one for live, 1 for neutral. How do I go about fitting this into the existing connections please ?