- Joined
- 2 Feb 2016
- Messages
- 2
- Reaction score
- 0
- Country
Hi all,
I have realised during my works that an existing lighting radial is wired as a star rather than a daisy-chain. So wire from CU goes to a ceiling rose, then onto a second rose at which point it splits into three legs. This has most likely been done to save cable as it follows the weird shape of the house. Is it ok? As far as I can tell all legs of the cabling are adequately protected by the 6A MCB. I can get our spark to change it, but won't bother if it's acceptable.
Thanks in advance for your knowledge...
O
I have realised during my works that an existing lighting radial is wired as a star rather than a daisy-chain. So wire from CU goes to a ceiling rose, then onto a second rose at which point it splits into three legs. This has most likely been done to save cable as it follows the weird shape of the house. Is it ok? As far as I can tell all legs of the cabling are adequately protected by the 6A MCB. I can get our spark to change it, but won't bother if it's acceptable.
Thanks in advance for your knowledge...
O