Mistral Oil Boiler - convert from C plan to fully pumped

anta · 25 Nov 2009

I want to convert our C-plan setup to fully pumped system. The boiler has outlet and return pipes at both sides, one to the HW circuit and the other to the CH circuit. Do I have to join these together or can I block one side off and run only from the other side? Perhaps I only need join the outlets and connect via a T jnuction to the pump in a Y-plan arrangement, but leave the two return connections to the boiler as they are.

What is easiest? Is it acceptable to block one side off? Or to join the two sides together? Or just join the outlets?

All help appreciated.

stem · 25 Nov 2009

I've not seen it on an oil boiler, but on older gas boilers, one flow and one return only are used. The others are blanked off.

You could always ask Mistral direct by clicking here Contact Mistral

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Mistral Oil Boiler - convert from C plan to fully pumped

anta

stem

DIYnot Local

Similar threads