nozzle what nozzle you have a flexi filling loop (pipe)
is that what you mean ?
is that what you mean ?
No heat in downstairs radiators
- Thread starter blueharvester
- Start date
Sponsored Links
sorry I was turning the wrong thing. I now turned the valve on the pipe and the black hand on the gauge is up to 1.5. Will let you know the results.
I turned the gauge to 1.5 bar but this still didn't work.
However, I finally found out what the problem was. The pump in the burner housing in the back yard was not running! My father-in-law said to feel it for a slight vibration but there was nothing. He then said to unscrew the front of it and push it in and out and side to side until it becomes loose. I did this and then turned the heating back on and the pump started to work again, and the downstairs radiators were hot within a matter of minutes!! Apparently you should do this every year to keep the pump in good working order.
Thanks again for all the replies.
However, I finally found out what the problem was. The pump in the burner housing in the back yard was not running! My father-in-law said to feel it for a slight vibration but there was nothing. He then said to unscrew the front of it and push it in and out and side to side until it becomes loose. I did this and then turned the heating back on and the pump started to work again, and the downstairs radiators were hot within a matter of minutes!! Apparently you should do this every year to keep the pump in good working order.
Thanks again for all the replies.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
