No hot water on combi

Joined
11 Jul 2005
Messages
3
Reaction score
0
Location
Cheshire
Country
United Kingdom
Hi All
Have a worcester bosch 24cdi (on gas). central heating working ok but not getting any hot water when hot tap is turned on.
 
Sponsored Links
DHW flow detection failed ???

Tony Glazier
 
By replacing the part!

However before replacing anything I would recommend the diagnosis is confirmed.

Tony
 
Sponsored Links
Agile said:
By replacing the part!

However before replacing anything I would recommend the diagnosis is confirmed.

Tony

Tony what part needs replacing?
 
Please be aware that there is fault-finding process that leads to reasonable confidence of determining which part has failed. Fault-finding is rarely easy for a novice, even with the kind of advice you can find on this forum.

Having said that, if an assistant opens a distant hot tap while you press your ear to the boiler, can you hear a "click"? You should hear one, because this is the noise that the flow switch makes. If you don't hear the noise then it's quite likely that the flow switch is faulty.

(Where's Joe when we really need him?)
 
I would always advise a proper electrical check rather than listening for noises!

Tony
 
I would always advise a proper reading of the preceding posting(s).
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top