Could someone tell me the current regs for notching out floor joists when laying central heating pipes, I want to install a few more rads but it would mean running the copper pipe through the floor joists, bit unsure how much and where i can notch out
Notching out floor joists for heating pipes
- Thread starter jon3674
- Start date
Sponsored Links
I know you can only notch an 1/8 of the depth of the joist. The min distance from wall is 7x span (of joist) then divide by 100 (if that makes sence)
Max distance from wall is span divided by 4.
If you are drilling through the joist it must be no more that 1/4 the depth and should be around mid way down the depth of joist
Max distance from wall is span divided by 4.
If you are drilling through the joist it must be no more that 1/4 the depth and should be around mid way down the depth of joist
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
