Hello,
I've recently had the entire house fitted out with uPVC windows. When it was being installed I chatted to the guys on occasion whilst they were working and noted that the glass panels had a sticker telling them which side had to be in the inside as it were. I saw one being installed, the "edges" banged in, and then he pulled the sticker off - on the inside of course.
Today I decided to have a look around all the windows from the inside of the house. When it came to the window where I watched the guy install the glass panel and peeled of the K-sticker, I noticed that inside the frame on the right hand side I could read what had been printed on it. See picture A below...
On some other glass panels, I noticed that the writing on the same right hand edge was upside down, like in picure B below...
Q1. Does this mean that all the glass panels that are like picture B have been installed the wrong way round? ie the K surface is on the outside rather than the inside?
Q2. Another question, for the bathroom and front door + side panels I had privacy/"frosted" glass panels installed. On these glass panels, one sheet is the "frosted" one and the other is normal 100% clear. In my bathroom, the "frosted" sheet is on the outer most sheet of glass and and the text on the right hand side (looking from inside of house) is as in picture A. On my front door + side panels they are the inner most sheet of glass and the text appears as in picture B. I'm guessing that the "frosted" sheet should be the outer most one like the bathroom one, is this correct?
I've recently had the entire house fitted out with uPVC windows. When it was being installed I chatted to the guys on occasion whilst they were working and noted that the glass panels had a sticker telling them which side had to be in the inside as it were. I saw one being installed, the "edges" banged in, and then he pulled the sticker off - on the inside of course.
Today I decided to have a look around all the windows from the inside of the house. When it came to the window where I watched the guy install the glass panel and peeled of the K-sticker, I noticed that inside the frame on the right hand side I could read what had been printed on it. See picture A below...
On some other glass panels, I noticed that the writing on the same right hand edge was upside down, like in picure B below...
Q1. Does this mean that all the glass panels that are like picture B have been installed the wrong way round? ie the K surface is on the outside rather than the inside?
Q2. Another question, for the bathroom and front door + side panels I had privacy/"frosted" glass panels installed. On these glass panels, one sheet is the "frosted" one and the other is normal 100% clear. In my bathroom, the "frosted" sheet is on the outer most sheet of glass and and the text on the right hand side (looking from inside of house) is as in picture A. On my front door + side panels they are the inner most sheet of glass and the text appears as in picture B. I'm guessing that the "frosted" sheet should be the outer most one like the bathroom one, is this correct?