Probably not the most complicated thing to do in the world but I thought I'd see if you have any tips before I go home and try it tonight!! We have a belfast sink, the overflow exits below the plug via a letterbox type hole in sink which obviously lines up with a similar hole in the waste shaft Only one seal was supplied, I guess this goes on under the sink and not under the plug. How tight does the bolt have to be, I don't want to crack the sink!!! Any tips on lining the overflow hole up with the sink or is it just a case of getting it as close as?
Thanks!! Probably all just common sense but just in case....
Thanks!! Probably all just common sense but just in case....