Prima LPR60 fault

[trap0001]

My Prima LPR600 Dish Washer has the following fault. It starts up ok, pre-rinses for about 5 mins then goes in drain and beeps continuously, power lamps flashes twice constantly. Any ideas?

The 12 digit numbers I found at the bottom are:-
8545 600 15810
33 0316 009315

 

[Sleepyhead]

2 flashes is error code for a flooded base.
Take off the access panel below the door, edes are razor sharp so be careful. Once off, gently press down on the centre of the base panel and the water will run out, hopefully onto a strategically placed towel.
Once drained, reset the machine and try again. Check for leaks before pushing the base panel back into place and refitting the access panel.