I have a protherm combi boiler that will not ignite, once powered up , pump kicks in, but nothing esle happens, time clock is o.k. winter summer mode swt checks out, i have no manual ! LED display is showing 19, any help would be appreciated.
Protherm 100e combi
- Thread starter skim
- Start date
Sponsored Links
Press the BAR button to get the system pressure displayed and set to about 1.5 with the valve on the filling loop.
Its most likely too low to allow the boiler to operate.
19 will be the boiler temperature or room temperature which is 19 ° C !!!
Tony
Its most likely too low to allow the boiler to operate.
19 will be the boiler temperature or room temperature which is 19 ° C !!!
Tony
I have adjusted to correct pressure but to no avail, any other ideas please ?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
