Queentruss Attic - Loft Flooring Conversion

Joined
11 Dec 2023
Messages
1
Reaction score
0
Country
United Kingdom
Hello,

New member here. Have been looking at my attic recently, and wondering what the possibility of partially converting it either into a part mezzanine area above a bedroom or alternatively an insulated hobby/storage room area.

Ceiling heights are limited at circa 1.5m, house is a Georgian stone terrace with a Queen-truss (I think that's correct terminology) framework roof space and solid stone external walls.

Below is an image of a section I've drawn up from a rough survey I've done of the attic. The tie beam spans the entire house, but is a v. large beam.

Section beams.jpg


I think what I'm looking at is something like the below;

Axo Proposals.jpg


Am I able to support the new 2x6 beams which will support flooring off the central tie beam? The span from beam to wall is circa. 2.5m. Would this be feasible? I will try and get a S.E input, but want to see rough feasibility before diving down that route. Currently there aren't any load bearing walls on this floor level.

At worst, what I would be happy with is just doing a 'nice' storage room, which is void of any spiders/ pests and is insulated to provide a nice area to store some items.

Many thanks for any advice, inputs, similar project inspo.

Thanks,
Ryan
 
Last edited:
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top