Hi
I have a ravenheat CSI85 4 years old, has separate ignition board and main PCB.
The pressure dropped due I think to a small leak, after re filling the system the boiler will not re start. The pump runs, the light is on, the pressure at 1.5 but no pilot or gas burner lights. Any Ideas???
Many Thanks
Tim
I have a ravenheat CSI85 4 years old, has separate ignition board and main PCB.
The pressure dropped due I think to a small leak, after re filling the system the boiler will not re start. The pump runs, the light is on, the pressure at 1.5 but no pilot or gas burner lights. Any Ideas???
Many Thanks
Tim