Gas meter feeds a Tee joint. One half of the Tee feeds the oven, hob and boiler. The other half feeds a spiders web of pipes throughout the house (capped ends visible and poking out in awkwards ends in pantry, kitchen, 4 fireplaces that used to has gas fires, run visible on the stairwell etc)
Can I get a gas safe registered person to cap the tee at the meter, and leave the rest "open" / vented of gas, so I can gradually start ripping it out? Nervous about touching gas pipes (even if confirmed not live).
Or do you need to cut and cap each location? Or can I just cut and hide it under floors etc. Looks like steel pipe, not copper. I've not worked with steel before.
Can I get a gas safe registered person to cap the tee at the meter, and leave the rest "open" / vented of gas, so I can gradually start ripping it out? Nervous about touching gas pipes (even if confirmed not live).
Or do you need to cut and cap each location? Or can I just cut and hide it under floors etc. Looks like steel pipe, not copper. I've not worked with steel before.