- Joined
- 5 Feb 2020
- Messages
- 2
- Reaction score
- 0
- Country
My existing Heating Controller is a Landis & Gyr RWB 100 and is only controlling the central heating with no internal thermostat.
I have the single channel Hive receiver just to control the boiler.
If you look at the wiring picture there is three wires (Earth Wire = N / Brown Wire = L and Blue Wire is in no. 4 with a link between the Live and No.2
My question is, do I just move the brown link wire from 2 to 1 and move the blue wire from 4 to 3?
Much appreciated,
Kevin.
I have the single channel Hive receiver just to control the boiler.
If you look at the wiring picture there is three wires (Earth Wire = N / Brown Wire = L and Blue Wire is in no. 4 with a link between the Live and No.2
My question is, do I just move the brown link wire from 2 to 1 and move the blue wire from 4 to 3?
Much appreciated,
Kevin.