hi guys...which is the correct/approved way to install 2 outside security lights (150w each)..is it good practice to take a feed from exising downstairs lighting circuit or to get a feed from the ring main or maybe even a dedicated circuit from the CU....also would i have to put in a fcu?????.......
security lights question.....
- Thread starter rastan
- Start date
Sponsored Links
- Joined
- 11 Jan 2004
- Messages
- 42,743
- Reaction score
- 2,634
- Country
No
Yes
Yes
Yes
Yes
Yes
Yes
to elaborate a bit
don't come off the existing lighting circuit unless other loading is very light (even if you have checked out the loading and it just about fits i wouldn't do it as interior lighting tends to get upgraded)
if coming direct from the CU use a 6A breaker, a type C may be a good idea to keep down neusense tripping (especilly if putting two on one breaker)
if coming off a ring fuse it down using a FCU fitted with a 3A fuse (fuses tend not to be bothered by surges like mcbs are)
don't come off the existing lighting circuit unless other loading is very light (even if you have checked out the loading and it just about fits i wouldn't do it as interior lighting tends to get upgraded)
if coming direct from the CU use a 6A breaker, a type C may be a good idea to keep down neusense tripping (especilly if putting two on one breaker)
if coming off a ring fuse it down using a FCU fitted with a 3A fuse (fuses tend not to be bothered by surges like mcbs are)
Sponsored Links
thanks plugwash....there are currently only 3 x 60w bulbs in use on the downstairs circuit....so fairly light load but i think i'll probably run it off the ring with fcu......thanks again
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
