- Joined
- 18 Nov 2007
- Messages
- 929
- Reaction score
- 28
- Country
Anyone using these? need a decent one for piloting and countersinking, wastes too much time changing bits all the time!
Spotted this on the bay:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=310076389451&ssPageName=STRK:MEWA:IT&ih=021
The Trend site sell the countersink and drill bit separately however this sells the whole thing. One question, I can't tell from that is if the drill bit is part of the hex shaft? if so brilliant, if not then I'm worried that the small hex nut securing the drill bit will come loose over time. I'm hoping the small nut is used to slide the countersink up and down to set your drill bit length?
Cheers
Spotted this on the bay:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=310076389451&ssPageName=STRK:MEWA:IT&ih=021
The Trend site sell the countersink and drill bit separately however this sells the whole thing. One question, I can't tell from that is if the drill bit is part of the hex shaft? if so brilliant, if not then I'm worried that the small hex nut securing the drill bit will come loose over time. I'm hoping the small nut is used to slide the countersink up and down to set your drill bit length?
Cheers
Links in this post may contain affiliate links for which DIYnot may be compensated.