Its mostly straight lengths though with a few Tees (granted some of them reduce, but perhaps don't need to so so).
So its all buildable with off the shelf bits... its not like anyone cuts their own joints/bends on site these days unless they really have to anyway!
While its obviously true that metal conduit is much more involved than plastic, not really sure the same is true of metal and plastic trunking, much smaller jump between them two.
So its all buildable with off the shelf bits... its not like anyone cuts their own joints/bends on site these days unless they really have to anyway!
While its obviously true that metal conduit is much more involved than plastic, not really sure the same is true of metal and plastic trunking, much smaller jump between them two.
