Vaillant VCW GB 242 EH not flashing up

Joined
29 Jun 2009
Messages
1
Reaction score
0
Location
Northamptonshire
Country
United Kingdom
Help!! I have no CH or DHW at the moment....The boiler will go into start up routine, pumps and vent fan runs, diverter valve moves and operates the microswitches, the differential valve has been off and checked and cleaned, there is the correct voltage at the Gas section operator and the water section diaphragm is okay and moves the cam and operates the microswitch.....and then the red neon light comes on after about 10 seconds and it trips out and shuts down......
next bit to work on is the gas operator valve (according to the manual!).

Is it tricky, and what does it actually do, or does anyone have any other thoughts as to what it could be?

Thanks for any help. :cry:
 
Sponsored Links
Asking a question like that, surely a wise man would call in an enginneer.
Watch over his shoulder if you feel the need too.
 
Is it tricky, and what does it actually do, or does anyone have any other thoughts as to what it could be?

It supplies the fuel that powers your boiler in the same way that a carburettor supplies the fuel that powers your car. If there is a problem with your car you go to a mechanic............
 
Sponsored Links
Does it start to spark at all??? flame supervision board ..possible
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top