hi there
having read some of the previous posts i decided to check the micro switch on the diverter valve to see if it was operating correctly and that it would explain why i get no hot water through taps.having lowered the control panel i got tap turned on why i watched the micro switch and diverter valve operate. but has mentioned on previous posts i couldn't see a white arm/needle that would operate the micro switch so i presume it has broke off.i pushed down on the nipple in the centre of the micro switch and boiler fired up straight away.so my question/ is the plastic arm/needle part of the diverter valve and do i have to change complete valve or is it a separate part
having read some of the previous posts i decided to check the micro switch on the diverter valve to see if it was operating correctly and that it would explain why i get no hot water through taps.having lowered the control panel i got tap turned on why i watched the micro switch and diverter valve operate. but has mentioned on previous posts i couldn't see a white arm/needle that would operate the micro switch so i presume it has broke off.i pushed down on the nipple in the centre of the micro switch and boiler fired up straight away.so my question/ is the plastic arm/needle part of the diverter valve and do i have to change complete valve or is it a separate part