Hi
I am building a timber framed construction :
100mm outer block - 50mm cavity - 9mm sterling board with breather paper - 140mm timber stud with glass wool insulation.
We are going to finish the inside with MR MDF and was wondering if we still needed to fit a vapour control layer as the MDF is moisture resistant ?
Cheers
I am building a timber framed construction :
100mm outer block - 50mm cavity - 9mm sterling board with breather paper - 140mm timber stud with glass wool insulation.
We are going to finish the inside with MR MDF and was wondering if we still needed to fit a vapour control layer as the MDF is moisture resistant ?
Cheers