Hi
We have an Aqualisa Aquavalve 700 shower valve installed.
Is it fed with a balanced water supply from an unvented cylinder at 3 Bar.
There is 22mm pipe work running right up to the valve, both the hot and cold water feeds.
The output from the valve is also in 22mm running to a fixed shower head.
Is there any downside in using the 22mm pipework ?
We have an Aqualisa Aquavalve 700 shower valve installed.
Is it fed with a balanced water supply from an unvented cylinder at 3 Bar.
There is 22mm pipe work running right up to the valve, both the hot and cold water feeds.
The output from the valve is also in 22mm running to a fixed shower head.
Is there any downside in using the 22mm pipework ?