I have read through the various subjects on this topic and have a similar flashing light issue.
The machine starts ok on any cycle but approx. 30secs into the cycle it stops and I get the dreaded flashing lights!
I have followed all advice about clearing the filter and all connections on the pcb seem to be intact.
Looking at the fault list I think it is a f04 fault as the 2nd light down (reduce creases) light is flashing along with the on/off light repeating. This would indicate a pressure switch stuck on empty(?).
How do I remedy this problem? Can I alter the pressure switch myself?
Any advice would be gratefully received.
Ptc
The machine starts ok on any cycle but approx. 30secs into the cycle it stops and I get the dreaded flashing lights!
I have followed all advice about clearing the filter and all connections on the pcb seem to be intact.
Looking at the fault list I think it is a f04 fault as the 2nd light down (reduce creases) light is flashing along with the on/off light repeating. This would indicate a pressure switch stuck on empty(?).
How do I remedy this problem? Can I alter the pressure switch myself?
Any advice would be gratefully received.
Ptc
