- Joined
- 23 May 2008
- Messages
- 1
- Reaction score
- 0
- Country
Hello everybody,
I have a Whirlpool washing machine AWG338, which is shipped with a brushless engine. So has no carbon within, but seems to be working with an electronic card to manage the rotation of the engine.
Nowadays, the washing programs stop during the wash. The machine was used to rotate the drum in both directions initially and has gradually stopped rotating in one sense.
Today the drum rotates well at the beginning of the program in one sense, then try to start to turn in the opposite sense and stops abruptly, interrupting the washing program cycle.
From there the programmer continues to run and click, but not the drum anymore.
Any suggestions or ideas to help in diagnostic the situation would be much more appreciated.
Thank you in advance.
I have a Whirlpool washing machine AWG338, which is shipped with a brushless engine. So has no carbon within, but seems to be working with an electronic card to manage the rotation of the engine.
Nowadays, the washing programs stop during the wash. The machine was used to rotate the drum in both directions initially and has gradually stopped rotating in one sense.
Today the drum rotates well at the beginning of the program in one sense, then try to start to turn in the opposite sense and stops abruptly, interrupting the washing program cycle.
From there the programmer continues to run and click, but not the drum anymore.
Any suggestions or ideas to help in diagnostic the situation would be much more appreciated.
Thank you in advance.