Whirlpool Smart Dry ADG 9556

Joined
9 Sep 2007
Messages
2
Reaction score
0
Country
United Kingdom
Found pool of water around the dishwasher this morning. Normally when basin full of water I put a rinse cycle on and it drains - however this hasn't worked and the machine is just beeping and the start green button is just flashing. I've cleaned the filter in the basin at the bottom, but no change. I've opened the salt container and it's filled with water too - don't know if that's normal. I'm assuming the water on the floor came from the door - at least I hope so. Any advice? As you can no doubt tell, I know nothing about Dishwasher maintenance and can't find the manual anywhere.

The light for the blue liquid is red - I've never used this liquid by the way, always used the tabs, and only recently used salt. Machine two years old.
 
Sponsored Links
By the way, the green light is flashing twice between pauses.

Appreciate any advice at all. Many thanks,

KT
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top