Hired a Makita 8406 to drill 15mm (outside water tap) and 40mm (sink waste) through xternal cavity wall. I had no problem with the inside (breeze block) but when we got to the brick it just didn't get anywhere.
Ok, the drill bits (masonary) are rather blunt. I'm using hammer action but the drill sometimes "slips" (if you know what I mean).
So its either the wrong drill or wrong drill bit. Somebody said I should use an SDS drill for brickwork (whatever one of those is!?)
Cheers!
--
Ian
Ok, the drill bits (masonary) are rather blunt. I'm using hammer action but the drill sometimes "slips" (if you know what I mean).
So its either the wrong drill or wrong drill bit. Somebody said I should use an SDS drill for brickwork (whatever one of those is!?)
Cheers!
--
Ian