Window sill replacement/Repair

Joined
10 Dec 2009
Messages
713
Reaction score
16
Location
Middlesex
Country
United Kingdom
Wasnt sure if i should put this in Windows/doors section or woodworking.

Anyway ive got this window sill on the side of a conservatory. Used to be under an overhanging tree which has been removed.
As you can see the wood work has seen better days and in need of some attention




The glazing bars all need replacing by the looks of things but im not sure about the actual sill.

The big square end cap or beam? is a bit more worrying as it looks like something has been eating it on the edges!! ( cant sre any of the small exit holes that typically occur with wood wom though)

On close inspection of the sill itself, there are no areas where the wood has crumbled away or appears to have completely degraded. The wood is pretty dry but is slightly soft.

Im wondering if I can remedy this for a limited time using some wood hardener and a smooth over with exterior filler?


In terms of replacing the whole sill, has anyone got advice on how this type of sill would be fitted to the frame?
Ive not able to find any hidden fixings yet so not sure how I would go about removing it and replacing with a new one if required.


Any suggestions of how best to sort this lot out?


Also anyone know the specific profile name for those glazing bars?
 
Last edited:
Sponsored Links
If its like the old bolton and paul ones I had the sill is an integral part of the frame. I sliced a rotton one off flush then made one which was dowelled glued and screwed back on .Having said that it was only 48” long
 
If its like the old bolton and paul ones I had the sill is an integral part of the frame. I sliced a rotton one off flush then made one which was dowelled glued and screwed back on .Having said that it was only 48” long


anyone know if this may be fitted independent of the frame itself and where i can look to try and identify how its fitted?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top