- Joined
- 7 Oct 2016
- Messages
- 9
- Reaction score
- 0
- Country
Hi,
I have a Jollyfill dual flush system. It was initially filling to the correct level and then over time would overfill and water was dripping into the pan....
I researched the issue through google and found that the diaphragm washer inside the inlet valve is usually the culprit!
I have replaced this washer and screwed the inlet valve back together. But now i can visibly see water leaking from around the seal and out through the top of the inlet valve. I am sure i have seated it as per the old one that i took out.
Any advise anyone can offer would be greatly appreciated.
Cheers
Alan
I have a Jollyfill dual flush system. It was initially filling to the correct level and then over time would overfill and water was dripping into the pan....
I researched the issue through google and found that the diaphragm washer inside the inlet valve is usually the culprit!
I have replaced this washer and screwed the inlet valve back together. But now i can visibly see water leaking from around the seal and out through the top of the inlet valve. I am sure i have seated it as per the old one that i took out.
Any advise anyone can offer would be greatly appreciated.
Cheers
Alan