Did you fit the black metal circlip that holds the micro witch casing in place?
Worcester 24cdi no hot water
- Thread starter nabby68
- Start date
Sponsored Links
Yes I did
- Joined
- 2 Oct 2010
- Messages
- 3,625
- Reaction score
- 666
- Country
Jiminblack is the CC. Good luck.
Maybe just another thing to consider regarding the micro switch. When i removed the two wires connected to it I noticed they were both the same colour (pink) so I assume that it doesn’t matter which way round they go when reattached?
Sponsored Links
Problem solved! I noticed,when looking at the diverter valve diaphragm pin from underneath that the black plastic disc was missing from it therefore it couldn’t operate the switch. After a quick look around I found it wedged between the floor boards under the boiler. Reattached it and now hot water!
Thanks for all your help. Really appreciated.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
