Zanussi WJS 1265W on 90 degree wash

Joined
20 Aug 2005
Messages
7
Reaction score
0
Location
Surrey
Country
United Kingdom
A little while back the panel lights on our Zanussi WJS 1265W washer-dryer would intermittently go out and the controls misbehaved. I seem to have fixed the problem by reseating the wires between the control unit and the panel.

There is still one problem though, if we select the hottest wash cycle (cotton, 90 degrees) the machine starts to run then puts itself into pause after a few minutes - pressing the pause button then sends it into the final 3 minutes of the cycle. Any ideas as to what the problem might be would be most welcome, thanks.
 
Sponsored Links
May be a burnt out solenoid coil in the hot water valve or even a problem with your hot water plumbing to the machine. Hot water is not used for some programmes so they would still work OK.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top