Additional Strobe's

[alarmbenjy]

Can additional strobes be added to my system or will this interfere with the bell box strobe?

I've got the Accenta/Optima Gen4 with a Lynteck/Midas Bell Box and I've added a standalone strobe and connected it to the +/- strobe terminals in the control panel.

However the bell box is connected differently and only uses the strobe - terminal in the control panel.

 

[Alarm]

Should be fine.
Should not draw too much power if unsure just take a ma reading.
If you cannot do that, do a bell and strobe test, if the fuse blows its too much