I accidently overfilled the boiler. Initially the gage went up half way but when the boiler fired up the pressure gage showed 3 bar! I switched the boiler off and bled the radiator. The pressure went down BUT the boiler doesn't switch on and there's nothing showing on digital display, as if it's power is off.
I checked the main fusebox and all fuses are on! I checked the internal boiler fuse with an Ohm meter and it's fine? Is it likely to be a problem with the PCB? Any advice on how i could resolve this?!?!
I checked the main fusebox and all fuses are on! I checked the internal boiler fuse with an Ohm meter and it's fine? Is it likely to be a problem with the PCB? Any advice on how i could resolve this?!?!