- Joined
- 10 Feb 2010
- Messages
- 37
- Reaction score
- 0
- Country
I have just replaced a ceiling rose, cable and lampholder.
I then attached a new 20watt energy saving lamp.
It works o.k.
However, when I turned the lamp off, we noticed that the lamp pulsed with light every 15 secs or so, with the power off, I tried another similar older lamp but that seems to be fine.
Any suggestions as to why this should happen please?
tia
I then attached a new 20watt energy saving lamp.
It works o.k.
However, when I turned the lamp off, we noticed that the lamp pulsed with light every 15 secs or so, with the power off, I tried another similar older lamp but that seems to be fine.
Any suggestions as to why this should happen please?
tia