- Joined
- 8 Mar 2010
- Messages
- 255
- Reaction score
- 0
- Country
Hi there,
Am installing a Honeywell Accenta Mini G4 and all seems to be going well.
Only using 7 of the 8 zones, and seem to have everything programed correctly. But I have encountered two issues that the Engineers Manual does not seem to address.
The external sounder is set to run for the default time of 15 mins, but when testing with the system set, it only works for about 5 seconds before stopping. The beeper on the RKP on the other hand, continues to work, as does the strobe. What do I set to have it running for the full 15 mins?
The other issue is the exit/entry point. Setting the alarm with the RKP, everything beeps and sets in a bout 30 seconds. But coming in through the front door, activates the alarm, the external sounder runs for about 5 seconds (see above) as does the strobe and internal beeper, until I enter my User Code. The front door is set as the exit/entry point with a 30 second delay on both events, but that does not happen on entry. How do I set and activate a delay?
Many thanks,
Rex
Am installing a Honeywell Accenta Mini G4 and all seems to be going well.
Only using 7 of the 8 zones, and seem to have everything programed correctly. But I have encountered two issues that the Engineers Manual does not seem to address.
The external sounder is set to run for the default time of 15 mins, but when testing with the system set, it only works for about 5 seconds before stopping. The beeper on the RKP on the other hand, continues to work, as does the strobe. What do I set to have it running for the full 15 mins?
The other issue is the exit/entry point. Setting the alarm with the RKP, everything beeps and sets in a bout 30 seconds. But coming in through the front door, activates the alarm, the external sounder runs for about 5 seconds (see above) as does the strobe and internal beeper, until I enter my User Code. The front door is set as the exit/entry point with a 30 second delay on both events, but that does not happen on entry. How do I set and activate a delay?
Many thanks,
Rex