DIYnot
Local | Network
   DIYnot > Forums
Local | Network
DIYnot Network Local DIYnot Network Local  
  Forum IndexForum Index     RulesRules    HelpHelp     Join FREERegister Free     About CookiesCookies     SearchSearch     LoginLogin 

Tyrolean repair.


 
Post new topic   Reply to topic    DIYnot.com Forum Index > Plastering and Rendering
Search this topic :: View previous topic :: View next topic  
Author Message
Crakkers

from United Kingdom

Joined: 26 Aug 2007
Posts: 85
Location: Lancashire,
United Kingdom

PostPosted: Sun Sep 30, 2007 7:31 pm Reply with quote

Just had a new boiler fitted. Outside wall tyrolean (i think), but now with a horrible ceement square in way of old boiler vent.

Can I DIY tyrolean a repair or something like?
Back to top
 Alert Moderators

If you do not want to see this advert, click here to login or if you are new click here to join free.
roughcaster

from United Kingdom

Joined: 02 Aug 2007
Posts: 4370
Location: Moray,
United Kingdom
Thanked: 513 times

PostPosted: Sun Sep 30, 2007 9:57 pm Reply with quote

It is very difficult, perhaps impossible to carry out an invisible repair on any roughcasted/tyroleaned/ textured surface. You will always see it, no matter how well it has been patched, but with a little bit of work it can be blended in, and made to look ok. If the cement render patch has been reasonably done and not built up around the edges,and onto the original tyrolean finish (t/f), you can mask off the t/f very slightly beyond the cement render patch,and spray on a couple of thin coats just to build up the t/f on the cement render patch itself.When you are happy with the build up, remove the masking and give a little spray 2 or 3" onto the original t/f to blend it in,,,but,,,,,
short of doing the whole wall again,, that is about as good as you will get..... You will also see the difference in colour between the new and old t/finish, but you could always paint the wall sometime if need be.

Roughcaster.
Back to top
 Alert Moderators
Search this topic :: View previous topic :: View next topic  
Post new topic   Reply to topic    DIYnot.com Forum Index > Plastering and Rendering All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Similar Topics   Replies   Views   Posted 
tyrolean render repair around new windows 5 160 Sun Jan 20, 2013 11:34 am
Tyrolean Patch Repair vs K-Rend Finish - HELP!!!! 14 2620 Tue Apr 09, 2013 7:38 pm
Cleaning Tyrolean finish porch 3 100 Sun Feb 20, 2011 5:06 pm
Removing Tyrolean from UPVC windows 6 260 Sun Oct 10, 2010 10:42 pm
Blown tyrolean 6 620 Mon Apr 12, 2010 6:49 pm


 
DIYnot
Find an Expert | Find a Supplier | Search DIYnot.com
Network | Advertising | Newsletter
DIY | DIY How To | @home | DIY Wiki | DIY Forum
By using this site you agree to our Terms of Service / Disclaimer.
Please read our Privacy Policy. Copyright © 2000-2014 DIYnot Limited.