Leisure rangemaster control panel removal

[tallpaulunderwood]

Folks,

I hope someone can help me. I need to fit a new grill switch to my Leisure rangemaster 110. However, I'm struggling to get the control panel off. I've taken off all the knobs + undone the four screws at the bottom of the panel. The bottom end of the panel will now pull out a bit, however, I can't get it loose at the top, it won't seem to budge in any direction. Any ideas ?

Thanks, Paul

[assuhors]

There are more screws at the top of the control panel.If it is all electric i.e. solid hotplates etc. there are screws at the back and then hob will move off I think sideways to gain access to screws.

[tallpaulunderwood]

Hi. This one is gas hob (4 burners); metal hot plate; ceramic plate warmer, electric oven. Not sure if that makes a difference or not (?)