Whirlpool awm321 overflow

Joined
28 Nov 2005
Messages
1
Reaction score
0
Location
Glasgow
Country
United Kingdom
Stupidly put soap flakes in the detergent drawer. Seems to have clogged the intake of water at start of program with water overflowing via the drawer compartment. Can anyone give me advice on how to unblock? How much dismantling of the machine will I have to undertake? Any other tips eg precautions before I attempt to get to the source of the blockage and how to get to the source of the blockage on this model. Thank you
 
Sponsored Links
if you cant unblock it in situ then try this.
to remove the front panel
1. open the door and remover the wire clamp around outer edge of door seal.
2. undo two screws which hold door lock
3. peel off outer edge of door seal
4.remove kick plate at floor level.
5. undo three 7mm screws at base of front panel.
6. slide front panel down wards about 1cm
7. panel will detach from cabinet.

now you are into every thing.

putting it back is a little awkward but just reverse the sequence of removal.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top