Moving Bath Taps

I am wanting to turn my bath around, which means extending the pipes to the other side of the bath. The pipes come up from the floor boards, so I assume I need to put a right angle connector on and run the pipes to the other side of the bath. Is this easy to do and will I lose water pressure?

1) Yes it is easy to do - you have choices of fitting depending on how confident you feel (compression / solder / push fit). The main issue is ensuring that you have control of the hot and cold supplies before you start.

2) No you won't lose water pressure

Don't forget that the waste will need about 30mm more fall on it - the bath waste should be about an inch higher than it currently is.