TDC30P HOTPOINT TUMBULE DRYER FAULT

Joined
3 Feb 2006
Messages
16
Reaction score
0
Country
United Kingdom
HI CAN ANYONE HELP ME. I HAVE A HOTPONT CONDENCER TUMBULE DRYER AND IT WILL NOT HEAT.IT IS NOT THE CUT OUT STATS ON THE ELEMENT AND IT IS NOT THE ELEMENT .THEY ARE ALL OK. BUT WHEN I SWICH IT ON THERE IS NO POWER GOING DOWN TO THE STATS OR ELEMENT CAN ANYONE HELP.
___________________________
lynda, moderator

please note forum rule 6
 
Sponsored Links
There should be an exhaust stat. You'll have to find where it's located (unless someone else knows).


Unplug your appliance before working on it.
 
theres a stat located top right of door opening
 
thanks to all who told me about the exhaust stat i did look at that and tha is ok
 
Sponsored Links
Could be it thinks it's full of water, blockage? and this would cut power to the heater.



Unplug your appliance before working on it.
 
Read what NigelD said, it will most likely be the stat located at the top of the door opening.
 
thanks for your help found fault on timer unit. thanks all
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top