This appliance was manufactured in 2000(according to the internal label) & will no longer spin?
I have took the motor out & checked the brushes but there is approximately 15mm left on them & the both return/expand with ease. All pipes from the drum to the outlet including pump have been taken off, inspected & free from any blockages.
After reassembling & putting a half load of soaked washing in it did a full spin cycle, but then would not spin again - Grrrr
I also noticed that the conditioner tray had not emptied but thats something Bold 3 in 1 will solve - lol.
Is there anything that any engineer can suggest to try before i set to it with a chainsaw!!
Any help appreciated
Graham
I have took the motor out & checked the brushes but there is approximately 15mm left on them & the both return/expand with ease. All pipes from the drum to the outlet including pump have been taken off, inspected & free from any blockages.
After reassembling & putting a half load of soaked washing in it did a full spin cycle, but then would not spin again - Grrrr
I also noticed that the conditioner tray had not emptied but thats something Bold 3 in 1 will solve - lol.
Is there anything that any engineer can suggest to try before i set to it with a chainsaw!!
Any help appreciated
Graham
