|
Trend TCT Counterbore 1/2" 3/4" 1/4"
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling ... |
£54.95 More Information |
|
|
Trend TCT Counterbore 3/4" 3/4" 1/4"
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling ... |
£57.95 More Information |
|
|
Trend TCT Counterbore 3/8" 3/4" 5/32"
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling ... |
£49.95 More Information |
|
Trend Snappy 4 Piece Drill Countersink and Plug Cutter Set
This set incorporates two drill countersinks and matching plug cutters. Plugs cutters are made from Tool Steel and are very slightly tapered. Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made us... |
£47.95 More Information |
|
Trend Snappy 82 Deg Countersink
Trend Snappy Countersink - 82 degree included angle Made from tool steel with an 82degree pitch, the countersink is an affordable, quality solution for all your general countersinking needs. Direct fit to Trend Snappy and compatible chucks for ... |
£18.95 More Information |
|
Trend Snappy 5 Piece Drill Countersink Set for Wood Screws
Heat treated tool steel countersinks with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter or 12.7 mm (1/2 inch diameter counterbored hole for woodplugs. The drill produces pilot holes only. |
£36.95 More Information |
|
Trend Universal Countersink
This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensure flutes of drill are alig... |
£36.95 More Information |
|
Trend Snappy 5 Piece TCT Drill Countersink For Wood Screws
Trend Snappy TCT Countersink Set - 5 piece set A 5 piece set for all your countersinking and piloting needs covering Imperial screw gauges from No4 through to No12. Comprises 1 x 2.0mm (5/64"") drill countersink, 1 x 2.5mm (3/32"") drill counte... |
£76.95 More Information |
|
Trend Snappy Drill Countersink For Wood Screws Size 12
Trend Snappy 12.7mm diameter countersink - with adjustable drill 12.7mm diameter countersink for up to 12 gauge Imperial screws. The perfect, fast swap accessory for clean, consistent finishes." Made from hardened tool steel for assured pe... |
£9.95 More Information |
|
Trend HSS Rose Countersink 20mm
These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics. Multi flute design. Ground shank for greater running accuracy.... |
£46.95 More Information |
